Common Rail Diesel Injector Repair Sockets
Must have when working on Common Rail engines.
This kit includes special tools to remove the injectors internal fixings.
Suitable for use on Bosch, Denso and Siemens injectors.
Includes:
3 x injector ball valve lapping tools.
Internal fixing removal tool for Common Rail injectors.
8 side socket for Bosch Common Rail engines.
Denso CR injector valve seat removal tool.
10 x 7.6 mm hex bit.
Deep Impact Socket Set, 1”Inch, 6pt, 22-50mm, 11-Piece
Diesel Fuel Filter Socket for Ford Transit
Difficult Access Socket Set; 3/8″dr 6-Piece
Set of six difficult access 3/8"D window sockets in a useful range of sizes: 10, 11, 12, 14, 17 and 19mm. The cut out allows access to pipe connectors and wired sensor units (not Lambda), particularly useful when loosening ABS pipes, master cylinder pipes, diesel injection pipes and wired sensors.
Socket sizes: 10, 11, 12, 14, 17, 19mm.
Lengths: 53mm (10 - 12mm), 62mm (14mm), 80mm (17 - 19mm).
Ideal for use in difficult access applications.
Applications include: loosening ABS pipes, master cylinder pipes, diesel injection pipes and wired sensors (not lambda).
Double-Joint Ratchet Combination Wrench Set 8-19 mm
Drive Shaft Socket Set; 6-Piece
Drive Shaft Socket Set; 8-Piece
E-Torx; Deep 1/4”, E4-E10, S2 Steel 6-Piece Set
EV Hybrid Tool Kit; 63-Piece
Comprehensive EV-Hybrid Tool Kit
A master EV tool kit designed for a wide range of applications, individually tested, and rated for 1,000 Volts
Rugged Design
Insulated VDE (Voltage Detection Equipment) fully compact tool case with rugged and shock-resistant features
EVA Technology Tray Development
All trays developed using EVA technology, providing durability and organization
Kit Includes:
Long Nose Pliers 8"
Side Cutter Pliers 6"
Combination Pliers 7"
Circuit Tester
Hex Key 3mm
Hex Key 4mm
Hex Key 5mm
Hex Key 6mm
Hex Key 8mm
Hex Key 10mm
Hex Key 12mm
1/2" Socket 10mm
1/2" Socket 11mm
1/2" Socket 12mm
1/2" Socket 13mm
1/2" Socket 14mm
1/2" Socket 16mm
1/2" Socket 17mm
1/2" Socket 18mm
1/2" Socket 19mm
1/2" Socket 21mm
1/2" Socket 22mm
1/2" Socket 24mm
1/2" Socket 27mm
1/2" Extension Bar 250mm
1/2" Ratchet Wrench
1/2" Bit Socket H4
1/2" Bit Socket H5
1/2" Bit Socket H6
1/2" Bit Socket H8
Wire Stripper 6"
Waterpump Pliers 10"
Adjustable Wrench 10"
Scissors 6"
Insluated Tape 10m
Philips Screwdriver PH1x80mm
Philips Screwdriver PH2x100mm
Pozi Screwdriver PZ1x80mm
Pozi Screwdriver PZ2x100mm
Slotted Screwdriver SL3x0.5x100mm
Slotted Screwdriver SL4x0.8x100mm
Slotted Screwdriver SL5x1x125mm
Slotted Screwdriver SL6x1.2x150mm
Torx Screwdriver T15x80mm
Torx Screwdriver T20x100mm
Torx Screwdriver T30x130mm
Open Ended Spanner 6mm
Open Ended Spanner 7mm
Open Ended Spanner 8mm
Open Ended Spanner 9mm
Open Ended Spanner 10mm
Open Ended Spanner 11mm
Open Ended Spanner 12mm
Open Ended Spanner 13mm
Open Ended Spanner 14mm
Open Ended Spanner 15mm
Open Ended Spanner 16mm
Open Ended Spanner 17mm
Open Ended Spanner 19mm
Open Ended Spanner 21mm
Wire Clamp 10mm
Wire Clamp 20mm
Wire Clamp 30mm
Exhaust Gas Temperature Sensor Sockets 2-Piece Kit 19-mm
Exhaust Gas Temperature Sensor Sockets 6-Piece Kit
Exhaust Gas Temperature Sensor Sockets 6-Piece Kit
Extractor Set for Screws (25-Pieces)
Allows removal of screws with damaged heads.
Suitable for Allen, T-Star & Spline Screws.
Extractors with 6pt sizes:
1/8''(3.2mm) 5/32''(4mm) 3/16''(4.8mm) 7/32''(5.5mm) 1/4''(6.3mm) 9/32''(7mm) 5/16''(8mm) 11/32''(8.7mm) 3/8''(9.5mm) 13/32''(10.3mm) 7/16(11.1mm) 15/32(11.9mm) 1/2''(12.7mm) 17/32''(13.4mm) 9/16(14.3mm) 19/32''(15.1mm) 5/8''(15.9mm) 21/32''(16.7mm) 11/16''(17.5mm) 23/32''(18.3mm) 3/4''(19.1mm) 25/32''(19.8mm) 13/16''(20.6mm) 27/32''(21.4mm) 7/8''(22.2mm).
Extractor Sockets For Rounded Nuts & Bolts; 12-Piece
Flexible Socket For Suspension Bolts On VAG Group
Specialist tool designed to be used when removing the top of Macpherson strut mounts. Which are commonly found on Audi, SEAT, Skoda and VW vehicles.
The fixtures are found in a confined area which makes access awkward via traditional methods. Although in a confined area the nuts a prone to corrosion and damage which means replacement and servicing is often needed.
Our product has been uniquely designed to access the strut mount with minimal effort due to the flexible design.
The factory OEM nuts can either be 6 or 8 point, due to the dual sided socket 4130-WW can accommodate both.
3/8'' drive - should be used with an extension bar (80 mm).
13mm socket.
Flexible Socket For Suspension Mount Bolts On VAG Group 14mm
Specialist tool designed to be used when removing the top of Macpherson strut mounts. Which are commonly found on Audi, SEAT, Skoda and VW vehicles.
The fixtures are found in a confined area which makes access awkward via traditional methods. Although in a confined area the nuts a prone to corrosion and damage which means replacement and servicing is often needed.
Our product has been uniquely designed to access the strut mount with minimal effort due to the flexible design.
The factory OEM nuts can either be 6 or 8 point, due to the dual sided socket 4130-WW can accommodate both.
3/8'' drive - should be used with an extension bar (80 mm).
14mm socket.
Funnel Mate; Mouldable Funnel Set 2-Piece
Hexagon Key Set 3/8”dr; 48mm, H3-H10
Hub Nut Socket for Ford Transit 2014 onward; Rear
Impact Flip Socket Set; 4-Piece Protective Coated 17-23mm
Compact and Protective
Introducing our compact and protective 4-Piece Impact Flip Socket Set.
Created from durable Cr-Mo steel, these sockets are designed to handle heavy-duty applications with ease.
Versatile Socket Set
The set includes six socket sizes: 17mm x 19mm, 21mm x 22mm, and 23mm x 24mm, providing versatility for various tasks.
Each socket is equipped with a plastic cover that offers optimal protection for delicate aluminum rims, preventing scratches or damage during use.
Efficient and Reliable
The colored plastic covers not only add a touch of visual appeal but also assist in quickly identifying the correct size for efficient workmanship.
This set is suitable for use with both manual and impact wrenches.
Single sizes available
Impact Power Hand Impact Wrench
Impact Sockets; 15-Piece Extra Stubby Hex Shanked 1/2”dr 10-24mm
Ideal impact sockets for confined spaces.
Each stubby socket has a hex shank which enables it to be used with a Spanner to allow usage in confined or awkward areas.
Supplied on an aluminium Socket Rail.
Sockets made from CR-MO.
Sizes Include: 10, 11, 12, 13, 14, 15, 16, 17, 18 , 19, 20, 21, 22, 23, 24mm.
Impact Vibration Glow Plug Removal Gun Incl Sockets 8-12mm
The impact wrench is designed to deliver low torque in 4 stages (10, 20, 30, 40 nm).
The use on vibrations and torque will allow easy removal of stuck glow plugs.
The level of torque will stop the shearing of the glow plug head.
Impact Gun: 20 to 40nm.
Deep Sockets: 8, 9, 10, 11, 12mm.
Extension Bars 50 & 100mm.
Universal Joint.
1/4'' Drive.