12 Volt Oil Pump
Max. flow rate for engine oil approx. 0, 2l /min.
Ideal equipment for quick and clean oil-changes.
The oil-pump works by connecting the clamps to the 12V car battery.
Can remove 100% of the used oil if inserted through the dipstick opening.
Complete with all necessary accessories.
Max. suction lift height: 70 cm.
No suitable for fuel and other easy flammable fluids.
.
16-Litre Fuel Pan
16-Litre Oil Pan Orange
2-Piece Universal Oil Funnel Set
3-Piece Flexible Tool Trays
Non Slip Tool Trays:
Designed with a semi-regid and flexible rubber material for protecting & organising various tools. The rubber is durable and easily wiped clean.
3 Trays Included to keep various tools Organised & Protected:
Small tray: 3 pockets (20mm deep) 15 Hex bit holders (1/4). Overall size: 275 x 145 x 25mm.
Medium tray: 6 pockets (20mm deep) 5 socket holders (hold sockets with max. diameter of 27mm). Overall size: 257 x 232 x 25mm.
Large tray: 7 pockets (30mm deep) Overall size: 540 x 290 x 35mm.
Trays are Compact & Space Saving:
These trays can be used separately to store and organise various tools or can be stored inside the larger tray for convenience.
4-Piece Magnetic Holders & Trays
Ideal for organising tools and keeping the work area tidy.
Heavy duty rubber coated magnets which prevent surface scratching.
Allows for easy access to commonly used items.
Robust steel construction.
Contents Include:
Spray-can tray with screwdriver holes that holds 3 spray cans & 7 screwdrivers.
6'' wide storage tray.
12'' wide storage tray.
Paper-towel roll holder.
4-Piece Magnetic Trays
40L Pneumatic Fuel Extracting Unit
For extracting gasoline and diesel fuel allows an easy emptying of tanks, fuel pumps, tank sensors or emptying wrongly filled tanks.
3 suction tubes Ø 6, 8, 10 mm - 2 m long.
Working pressure: 5 - 8 bar.
Air consumption: 170 l/min.
Suction power: 5 l/min.
Material: Stainless Steel.
Capacity: 40-Litres.
5-Litre Oil Flask & Measurement Twin Pack
70 Litre Mobile Suction Evac Oil Drainer, Air support
Sucking speed: 0.6-1.6L/Min.
Work pressure: 7-8Bar.
Collecting height: 1.85m.
Tack capacity: 90L.
Capacity of measuring cup: 10L.
Length of suction pipe: 1.5m.
Length of drainpipe: 2.0m.
Total weight: 37kgs.
Overall dimension: 500x500x500.
Fixed wheel: 7''.
Swivel castor: 4''.
Function: Multi-function: oil sucking, oil.
collecting & oil filling.
Additional large oil tray convenient for oil collecting.
Easy use to drain oil in low pressure.
Transparent measuring cup for easy oil observation.
Different type of nozzles is equipped for various condition.
70 Litre Waste Oil Drain Receiver
Designed for containing waste oils, such as on engines, gearboxes, rear axles, etc.
Compressed air connection, makes it easier to empty the container without oil spillage.
Hopper capacity: 8 litres (Ø 48 cm).
4 castors, 2 swivel wheels for easy maneuvering (Ø 150 / 75 mm).
Includes emptying hose.
Length 165 cm.
Min. Height: 112 cm.
Max. Height: 162 cm.
Container: Ø 41 cm / height 82 cm.
8-Drawer Professional Workshop Trolley
Durable worktop surface with 5 storage trays and 50kg capacity to keep parts organized and store tools for easy access while you work.
Ultra-smooth running drawers thanks to high quality ball bearing rollers.
Lock complete unit at once with central locking mechanism.
Heavy duty side mounted handle for easy manouverability.
Side storage perfect for quick access: 78 x 370 x 75mm.
Heavy duty 1.2 mm body thickness with workshop finish.
High quality 125 mm castor wheels with locking switch.
Drawer capacity:
Drawers 1-4: 20kg each.
Drawers 5-7: 20kg each.
Drawer 8: 30kg.
Drawer width: 569mm.
Drawer depth: 409mm.
Drawer height: 4 x 53, 3 x 111, 1 x 169mm.
8-Drawer Professional Workshop Trolley with tools
Durable worktop surface with 5 storage trays and 50kg capacity to keep parts organized and store tools for easy access while you work.
Ultra-smooth running drawers thanks to high quality ball bearing rollers.
Lock complete unit at once with central locking mechanism.
Heavy duty side mounted handle for easy manouverability.
Side storage perfect for quick access: 78 x 370 x 75mm.
Heavy duty 1.2 mm body thickness with workshop finish.
High quality 125 mm castor wheels with locking switch.
This professional workshop trolley comes packed with tools including;
Tool Tray; Ratchet, Socket & Extension 1/2”, 3/8”, 1/4”dr Assortment - 3623-WW
Tool Tray; Bit Socket Torx, Spline, Hex Assortment - 3624-WW
Tool Tray; Multipile Plier Assortment - 3621-WW
Tool Tray; Trim Removal, File, Pick & Hook & Knife Assortment - 3617-WW
Tool Tray; Aviation 8-24mm, Ratchet Spanners, Combination Spanner Assortment - 3619-WW
Tool Tray; Screwdriver, Torx-Screwdriver Set & 32-Pc Assortment - 3620-WW
Tool Tray; T-Handle Torx, Hex, & Torx Assortment - 3622-WW
8-piece Induction Coil Set for Induction Heater
8-piece Induction Coil Set, Flat Type, for Induction Heater
Adaptor For VAG Models For use with 2887-WW
AdBlue Syringe 1.5L
ATF Adaptor For DCT Gear Boxes on VAG Group
Automatic Wire Stripper With Voltage Detector
Automatic wire stripper with voltage detector.
Visual and Audible voltage detection indicator. Auto switching prevents battery discharge.
Non contact voltage detector 12-250v AC. Always check on a known live source.
Stainless steel wire cutter (cuts 10 - 30 AWG). Crimps non insulated terminals.
Supplied with 2 LR44 button cell batteries.
Booster Pack, Extreme Heavy Duty; 12/24v
Automatic charger with smart circuit which allows the unit to be left in continuous charge without incurring damage.
Superior quality components guarantee reliability and high levels of safety.
Starts up to 30 cars before recharging is needed*.
Impact resistant, durable and robust casing.
LED Power level indicator.
12v: 2200 Peak Amps.
24v: 3200 Peak Amps.
Booster Pack, Extreme Heavy Duty; 12v
Automatic charger with smart circuit which allows the unit to be left in continuous charge without incurring damage.
Superior quality components guarantee reliability and high levels of safety.
Starts up to 30 cars before recharging is needed*.
Impact resistant, durable and robust casing.
LED Power level indicator.
12v: 2500 Peak Amps.
Booster Pack; Mini Type, 12v
Applications:
Diesel engines: up to 3.0l.
Petrol engines: up to 6.5l.
Mains or 12v charging.
Dimensions: 17 x 18 x 15.5 cm.
Weight: 5.1kg.
Digital meter: display voltage 3 to 30 v.
Output: 12v(DC) max/ 10A: 5v USB/max 2A.
Instant max current 1200A.
Charging power: AC 100-240v, 50/60Hz, CE/UL, PSE.
Battery: ACID, DC 12v/14aH.
Cold Cranking Amps: 800.
Car Engine Oil Filling Device with Adaptors 11-Piece
New Updated Kit allows for fast oil filling without spillage Great for many late model vehicles with internal baffles 2 litre funnel fits adapters for wide application range colour-coded adapters for oil filler hole Special angled extension with swivel feature for hard-to-reach places.
Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.
Car Engine Oil Filling Device with Adaptors 7-Piece
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adapters for wide application range.
Colour-coded adapters for oil filler hole.
Special angled extension with swivel feature for hard-to-reach places.
Applications: Audi, BMW, Citroen, Ford, SEAT, Skoda, Peugeot, Renault, Vauxhall, VW etc.
Common Rail Diagnostic Set
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Common Rail Flow Meter Set Updated Version
Assists with diagnosis of: Poor or no engine starting, smoke on tick-over or acceleration, overall lack of engine power, rough running, poor acceleration.
Designed for use on the injector return side of a common rail diesel system, measures return fuel flow on engines up to ten injectors in one test.
Applications: Bosch, Delphi, Denso, Siemens, etc.
Digital Battery Load Tester
Extendable Razor Scraper
Extra Deep Magnetic Tray
Extra Large Magnetic Tray Quad
Fluid Extractor Air & Manual 6-Litres
Transparent body for visibility of the fluid during use.
Suitable for fluid evacuation by both manual operation or compressing air.
Can be used for oil, etc on most engine types (cars, motorcycles, marine, etc.).
Can be used for low viscosity fluids.
Multiple Adapters.
Maintenance free.
6L capacity.