Used to Clean and De-carbonise injector seats when Changing Injectors.
14 x 14mm Flat Reamer.
15 x 19mm Flat Reamer.
15.5 x 15.5mm Flat Reamer.
15.5 x 15.5mm Angled Reamer.
17 x 17mm Angled Reamer.
17 x 17mm Flat Reamer.
17 x 17.5mm Flat Reamer.
17 x 19mm Flat Reamer.
17 x 19.5mm Flat Reamer.
17 x 20mm Flat Reamer.
17 x 21mm Angled Reamer.
17.5 x 20.5mm Angled Reamer.
19 x 21.5mm Flat Reamer.
Pilot Hex Post 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Smoke Diagnostic Leak Detector Machine
£556.82 Ex. VAT
Brake Calliper Rewind Spindle; Air Operated
£76.56 Ex. VAT
21-Piece Master Injector Service Kit for Bosch, Delphi, Denso, Siemens
£196.82 Ex. VAT
Description
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Seat Cleaners; 17-Piece
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Injector Removal Kit; HDI Injectors
or use in the extraction of Bosch and Siemens HDI injectors. No need to remove the cylinders heads with this kit.
Suitable for vehicles with PSA 2.0l DW10/12 engines which can also be found on Toyota, Mazda and Hyundai models.
Included2 ball bearing puller spindles 2 Open sockets for removal of the electric unit. High performance support frame with spindle bearings.
Injector Copper Seal Kit; 150-Piece
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Pump Puller; VAG Engines
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
429-Piece Injector Seat and Port Cleaning Kit
Efficient Cleaning
429-Piece Injector Sealing Seat & Manhole Cleaning Set by WELZH ensures efficient cleaning of injector seats and shafts on diesel engines.
Includes cleaning brushes in different shapes & diameters.
Various Applications
Covers a wide range of vehicles & engines.
Set Includes
4 helix wire brushes; 34.9-30.2-29.5-25.1 mm.
3 two stage wire brushes; 12.1-19.1-25.4 mm.
6 bore wire brushes; 8-10-12-15-17-19 mm.
1 brush handle holder; with quick coupler; internal hexagon 6.3 mm (1/4?).
1 rigid extension; with quick coupler; external hexagon 6.3 mm (1/4?).
1 flexible extension; with quick coupler; external hexagon 6.3 mm (1/4?).
413-piece cleaning swab and assortment; different length 5-20 mm.
Reviews
There are no reviews yet.