For removing rust, dirt, corrosion and ridge that can build up on brake discs and hubs.
Very useful for removing the metallic lip around the edge of brake discs.
Manufactured from Black electroplated shafts with long lasting Quality Tungsten carbide tips.
View basket “Injector Removal Kit with Slide Hammer and Adapters; 24-Piece” has been added to your basket.
Brake Disk Lip Removal Kit
£101.19 Ex. VAT
For removing rust, dirt, corrosion and ridge that can build up on brake discs and hubs.
Very useful for removing the metallic lip around the edge of brake discs.
Manufactured from Black electroplated shafts with long lasting Quality Tungsten carbide tips.
SKU:
3648-WW
Category: Engine Tools
Description
Reviews (0)
Be the first to review “Brake Disk Lip Removal Kit” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Removal Adaptors; Universal
£155.25 Ex. VAT
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Injector Remover for Bosch Injectors; Diesel
£110.81 Ex. VAT
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Injector Removal Tool Kit; Vibration Hammer Edition
£415.69 Ex. VAT
Injector Removal Kit; HDI Injectors
£221.63 Ex. VAT
or use in the extraction of Bosch and Siemens HDI injectors. No need to remove the cylinders heads with this kit.
Suitable for vehicles with PSA 2.0l DW10/12 engines which can also be found on Toyota, Mazda and Hyundai models.
Included2 ball bearing puller spindles 2 Open sockets for removal of the electric unit. High performance support frame with spindle bearings.
Injector Copper Washer Seal Kit; 375-Piece
£55.41 Ex. VAT
13.8 x 7.3 x 1.4 mm x25.
14.6 x 7.5 x 1.3 mm x25.
14.6 x 7.5 x 3.0 mm x25.
15.0 x 7.0 x 2.0 mm x25.
15.0 x 7.5 x 1.0 mm x25.
15.0 x 7.5 x 1.5 mm x25.
15.0 x 7.5 x 2.0 mm x25.
15.0 x 7.5 x 2.5 mm x25.
15.0 x 7.5 x 3.0 mm x25.
15.5 x 7.5 x 2.0 mm x25.
16.0 x 7.5 x 1.5 mm x25.
16.0 x 7.5 x 1.7 mm x25.
16.0 x 7.5 x 2.0 mm x25.
16.4 x 7.5 x 2.0 mm x25.
20.0 x 9.4 x 0.9 mm x25.
Injector Copper Seal Kit; 150-Piece
£33.47 Ex. VAT
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
40-Piece Glow Plug Removal Kit M8-M10
£217.69 Ex. VAT
For removing damaged and broken glow plugs from cylinder heads.
Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head.
Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread).
6 x extractor sockets.
1 x dual size high tensile step drill.
1 x narrow pulling unit set.
1 x drill holder extension.
2 x taps.
2 x drill bits.
2 x glow plug chamber cleaning brushes.
Reviews
There are no reviews yet.