Designed for measuring break pad thickness without component removal, allow for a fast, accurate results.
Measurement range: 0-35mm.
Stahlheim Werkzeug work station
£3,995.00 Ex. VAT
12-Piece Air Hose Connector Adaptor Set EU Fitting
£33.47 Ex. VAT
Brake Pad Thickness Gauge Measure
£60.90 Ex. VAT
Designed for measuring brake pad thickness without component removal, allow for fast, accurate results.
Measurement range: 0-35mm.
Description
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Clamping Bolt Thread Repair Kit – Mercedes Benz CDi
Injector Thread Repair kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.
Allows the task to be performed with minimal dismantling allows the cam cover to remain in place for immense time saving.
Size M6 threaded insert fitting kit for Use on Mercedes Benz Injector clamping bolts.
For Use On: Mercedes Benz CDi engines.
Contents:Â M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts.
Replacement Inserts Available under Art: 60013-1-WW.
Injector Pump Puller; VAG Engines
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
40-Piece Glow Plug Removal Kit M8-M10
For removing damaged and broken glow plugs from cylinder heads.
Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head.
Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread).
6 x extractor sockets.
1 x dual size high tensile step drill.
1 x narrow pulling unit set.
1 x drill holder extension.
2 x taps.
2 x drill bits.
2 x glow plug chamber cleaning brushes.
Injector Copper Seal Kit; 150-Piece
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Removal Kit with Slide Hammer and Adapters; 24-Piece
Diesel Injector Master Kit.
Suitable for the removal of Bosch / Delphi / Denso / Siemens and Pumpe Duse diesel injectors.
1.3kg Slide Hammer with 150mm Shaft.
4kg Slide Hammer with 400mm Shaft and Handle.
With various Male and Female Adaptors.
Pump Duse Injectors Adaptors.
Injector Sockets - 25, 27, 29, 30mm.
Glow Plug Thread Repair Kit: M8, 9, 10, 12
For repairing the glow plug mounting thread in the cylinder head.
Includes:
5x reamer for reaming the original thread.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for threaded sleeves.
M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
5x taps for trimming the original thread M8 x 1.0 - M9 x 1.0 - M10 x 1.0 - M10 x 1.25 - M12 x 1.25.
Assembly tools for inserting the threaded sleeves.
5x threaded sleeves M8 x 1.0 (11 mm long).
5x threaded sleeves M9 x 1.0 (11 mm long).
5x threaded sleeves M10 x 1.25 (12 mm long).
5x threaded sleeves M10 x 1.0 (12 mm long).
5x threaded sleeves M10 x 1.0 (19 mm long).
5x threaded sleeves M12 x 1.25 (12 mm long).
5x threaded sleeves M12 x 1.25 (19 mm long).
5x threaded sleeves M12 x 1.25 (26 mm long).
Injector Removal Master Kit; Bosch, Delphi, Denso, Siemens
Master kit for use on Bosch, Delphi, Denso and Siemens injectors.
Can also be used on non branded injectors.
Included are special adapters for internal and external threads.
For more modern injectors look for Art. 4199.
Slide hammer 1.6kg, 160mm.
Slide hammer 2.7kg, 460mm.
Slide hammer 5.1kg, 600mm.
Pulling claw 13.7 x 18 mm, 105 mm long.
Pulling claw 12.7 x 19 mm, 130 mm long.
Slotted socket 1/2'' 25, 27, 28, 29, 30mm.
Pulling adapter Internal thread M27 x 1.0 (x3), M25 x 1.
Pulling adapter External thread M27 x 1.0 (x3).
Hammer adapter for all adapters.
Reviews
There are no reviews yet.