for 1.2, 1.4, 1.6 and 2.0 L TDI Common-Rail engines
also for the new engines built from 2013 in VW Amarock, Arteon, Beetle II, Caddy III/IV, Eos, Golf VI/VII, Jetta III/IV, Passat (3C/36/3G/CC), Polo (6R/AW), Scirocco III, Sharan (7N),
Tiguan (5N/AD/BW), Touran (1T/5T), T-Roc, T5/T6 and Crafter
Audi A1 (8X), A3 (8P/8V), A4 (B8/B9), A5 (8T/F), A6 (C7), Q2, Q3 (8P/8V), Q5 (8R/FY) and TT (8J)
Skoda Fabia II, Karoq, Octavia II/III, Rapid, Roomster, Scala, Superb II/III and Yeti
Seat Alhambra, Altea (5P), Arona, Ateca, Exeo, Ibiza IV/V, Leon (1P/5F), Tarraco and Toledo IV
when disassembling the piezo injectors for sealing or engine repair
for engine codes
CAGA, CAGB, CAGC, CAHA, CAHB, CAYA, CAYB, CAYC, CAYD, CAYE, CBAA, CBAB, CBBB, CBDA, CBDB, CBDC, CDBA, CEGA, CFFA, CFFB, CFFD, CFFE, CFGB, CFGC, CFGD, CFHA, CFHB, CFHC, CFHD, CFHE, CFHF, CFJA, CFJB, CFWA, CGLA, CGLB, CGLC, CGLD, CGLE, CJAA, CJCA, CJCB, CJCC, CJCD, CKFB, CKFC, CKTB, CKTC, CKUB, CKUC, CLCA, CLCB, CLHA, CLHB, CLJA, CLLA, CLLB, CLNA, CMEA, CMFA, CMFB, CMGA, CMGB, CNEA, CNFA, CNFB, CNHA, CNHC, CRBB, CRBC, CRBD, CRKA, CRKB, CRLB, CRLC, CRLD, CRMB, CRUA, CRVA, CRVC, CSHA, CSLA, CSNA, CSUA, CSUB, CSUD, CSUE, CUSA, CUSB, CUTA, CUUA, CUUB, CUUD, CUUE, CUUF, CUVA, CUVB, CUVC, CUVD, CUVE, CUWA, CUXA, CVCA, CXMA, CXXA, CXXB, CYKA, CYKB, CYZA, CYZB, CZHA, DBBA, DBGA, DBGB, DBGC, DBKA, DCXA, DCYA, DCYB, DCZA, DDCA, DDCB, DDDA, DDYA, DDYB, DEJA, DEJB, DELA, DEUA, DEUB, DEUC, DFEA, DFEB, DFFA, DFGA, DFGB, DFGC, DFHA, DFLA, DFLD, DFSA, DFSB, DFSC, DFSD, DFSE, DFSF, DFTA, DFTB, DFTC, DGDA, DGMA, DGTA, DGTB, DGTC, DGTD, DGTE, DJGA, DLTA, DLUB
View basket “Common Rail Flow Meter Set” has been added to your basket.
Diesel Injector Puller; For Piezo injectors In VAG TDi
£106.82 Ex. VAT
SKU:
3963-WW
Category: Injectors
Description
Reviews (0)
Be the first to review “Diesel Injector Puller; For Piezo injectors In VAG TDi” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Clamping Bolt Thread Repair Kit – Mercedes Benz CDi
£110.81 Ex. VAT
Injector Thread Repair kit provides the special tools required to drill out the broken bolt and fit M6 threaded inserts to allow new OEM M6 bolts to be used.
Allows the task to be performed with minimal dismantling allows the cam cover to remain in place for immense time saving.
Size M6 threaded insert fitting kit for Use on Mercedes Benz Injector clamping bolts.
For Use On: Mercedes Benz CDi engines.
Contents: M8x1.0mm Tap, 7-8mm step drill, 6mm drill, Drill guide, insert fitting tool & 5x threaded inserts.
Replacement Inserts Available under Art: 60013-1-WW.
Injector Service Kit; Bosch, Delphi, Denso, Siemens
£133.03 Ex. VAT
Injector Seat Cleaners; 17-Piece
£138.94 Ex. VAT
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Injector Seat Cleaners; 6-Piece
£66.66 Ex. VAT
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
£83.53 Ex. VAT
Common Rail Flow Meter Set
£110.81 Ex. VAT
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Injector Removal Kit with Slide Hammer and Adapters; 14 pcs
£110.81 Ex. VAT
Ball joint allows hammer to be used in confined areas.
Set includes keys and deep open profile sockets for.
Dismantling injectors, and adaptors.
Allows easy and quick removal of the injector.
Includes:
Sliding hammer with shaft and handle, weight 4400g.
Ball joint adaptors.
Adaptor (internal thread): m14 x m14 - m17 x m14, m25 x m14 - m27 x m14.
Adaptors (external thread): m27 x m14 - m20 x m14.
6-Pt socket for electrical unit 25 - 27 - 29 - 30.
10 Mm hexagon bit socket with 12.5-1/2 Drive.
Injector Copper Seal Kit; 150-Piece
£33.47 Ex. VAT
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Reviews
There are no reviews yet.