for 1.2, 1.4, 1.6 and 2.0 L TDI Common-Rail engines
also for the new engines built from 2013 in VW Amarock, Arteon, Beetle II, Caddy III/IV, Eos, Golf VI/VII, Jetta III/IV, Passat (3C/36/3G/CC), Polo (6R/AW), Scirocco III, Sharan (7N),
Tiguan (5N/AD/BW), Touran (1T/5T), T-Roc, T5/T6 and Crafter
Audi A1 (8X), A3 (8P/8V), A4 (B8/B9), A5 (8T/F), A6 (C7), Q2, Q3 (8P/8V), Q5 (8R/FY) and TT (8J)
Skoda Fabia II, Karoq, Octavia II/III, Rapid, Roomster, Scala, Superb II/III and Yeti
Seat Alhambra, Altea (5P), Arona, Ateca, Exeo, Ibiza IV/V, Leon (1P/5F), Tarraco and Toledo IV
when disassembling the piezo injectors for sealing or engine repair
for engine codes
CAGA, CAGB, CAGC, CAHA, CAHB, CAYA, CAYB, CAYC, CAYD, CAYE, CBAA, CBAB, CBBB, CBDA, CBDB, CBDC, CDBA, CEGA, CFFA, CFFB, CFFD, CFFE, CFGB, CFGC, CFGD, CFHA, CFHB, CFHC, CFHD, CFHE, CFHF, CFJA, CFJB, CFWA, CGLA, CGLB, CGLC, CGLD, CGLE, CJAA, CJCA, CJCB, CJCC, CJCD, CKFB, CKFC, CKTB, CKTC, CKUB, CKUC, CLCA, CLCB, CLHA, CLHB, CLJA, CLLA, CLLB, CLNA, CMEA, CMFA, CMFB, CMGA, CMGB, CNEA, CNFA, CNFB, CNHA, CNHC, CRBB, CRBC, CRBD, CRKA, CRKB, CRLB, CRLC, CRLD, CRMB, CRUA, CRVA, CRVC, CSHA, CSLA, CSNA, CSUA, CSUB, CSUD, CSUE, CUSA, CUSB, CUTA, CUUA, CUUB, CUUD, CUUE, CUUF, CUVA, CUVB, CUVC, CUVD, CUVE, CUWA, CUXA, CVCA, CXMA, CXXA, CXXB, CYKA, CYKB, CYZA, CYZB, CZHA, DBBA, DBGA, DBGB, DBGC, DBKA, DCXA, DCYA, DCYB, DCZA, DDCA, DDCB, DDDA, DDYA, DDYB, DEJA, DEJB, DELA, DEUA, DEUB, DEUC, DFEA, DFEB, DFFA, DFGA, DFGB, DFGC, DFHA, DFLA, DFLD, DFSA, DFSB, DFSC, DFSD, DFSE, DFSF, DFTA, DFTB, DFTC, DGDA, DGMA, DGTA, DGTB, DGTC, DGTD, DGTE, DJGA, DLTA, DLUB
View basket “Injector Service Kit; Bosch, Delphi, Denso, Siemens” has been added to your basket.

Mini Air Needle Scaler
£234.95 Ex. VAT

12-Piece Air Hose Connector Adaptor Set EU Fitting
£33.47 Ex. VAT
Diesel Injector Puller; For Piezo injectors In VAG TDi
£106.82 Ex. VAT
SKU:
3963-WW
Category: Injectors
Description
Reviews (0)
Be the first to review “Diesel Injector Puller; For Piezo injectors In VAG TDi” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Adaptor; Ford Eco-Blue 2.0
£164.95 Ex. VAT
Specially Designed
The Welzh Injector adaptor is specially designed to be used with Welzh Vibration Mate (4589-WW) for removing Ford EcoBlue diesel injectors in one piece.
Convenient
Previously, the EcoBlue injectors could only be removed if the fuel return connection and Piezo head were removed by breaking them off; rendering the injector unusable. This kit allows these injectors to be pulled out without needing to break the injector first.
It extracts diesel injectors in one piece; allowing them to be refitted.
Applications Include
Ford Edge, Focus, Galaxy, S-Max (from 2018); Kuga, Mondeo, Ranger (from 2019); Tourneo, Transit (from 2016), and 2.0L EcoBlue diesel engines.
Injector Pump Puller; VAG Engines
£166.22 Ex. VAT
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Injector Copper Seal Kit; 150-Piece
£33.47 Ex. VAT
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Removal Tool; Vauxhall, Opel Direct Injection Petrol
£64.95 Ex. VAT
Welzh Injector Removal tool
For use on the late model 1.0L and 1.4L direct injection petrol engines used across the Vauxhall, Opel and some MG ranges. These small injectors are centrally mounted low between the cam shafts and in line with the spark plugs.
Effective Removal
Some force is required to remove the injectors. The most effective way to remove these is to use the adaptor set with the WELZH Vibration Mate (4590-WW, 4589-WW). The Injector Removal Tool (4998-WW) adaptor set has been specifically design to bolt directly to the fuel rail mounting on the Petrol Injector 5/8? UNF slide hammer adaptor.
Applications include:
MG ZS (2017 - 2021), Vauxhall/Opel Adam (2016 - 2020), Astra K (2015 - 2019), Corsa E (2015 - 2020) and Mokka X (2018 - 2020).
Engine code applications include: 1.0L LE1/B10, 1.4L LDD/D14XEL, D14XER, LE2/D14XFL, D14XFT, LUJ/D14NE, D14NEH, D14NEJ, LUJ/D14NEL and 1.5L 15E4E.
Designed to bolt directly to the 2 bolt fixing on the fuel pipe mounting plate. Equivalent to OEM TEN00140.
Vibration Mate Injector Removal Tool
£500.00 Ex. VAT
Injector Removal Kit with Slide Hammer and Adapters; 14 pcs
£110.81 Ex. VAT
Ball joint allows hammer to be used in confined areas.
Set includes keys and deep open profile sockets for.
Dismantling injectors, and adaptors.
Allows easy and quick removal of the injector.
Includes:
Sliding hammer with shaft and handle, weight 4400g.
Ball joint adaptors.
Adaptor (internal thread): m14 x m14 - m17 x m14, m25 x m14 - m27 x m14.
Adaptors (external thread): m27 x m14 - m20 x m14.
6-Pt socket for electrical unit 25 - 27 - 29 - 30.
10 Mm hexagon bit socket with 12.5-1/2 Drive.
Injector Sealing Plug Set, 12-Piece
£88.59 Ex. VAT
12-Piece Injector Sealing Plug Set.
For sealing Injectors prior to pressure loss Testing.
Protects the Injector from contamination during Work.
Suitable For use on: Bosch, Delphi, Siemens & Denso Injectors.
Applications:Â Opel-Vauxhall, Mazda, Ford-Volvo, PSA Group, Mercedes-Benz, Renault, Fiat-Chrysler & Others.
Contents:Â 6x M12x1.50 Caps, 6x M14x1.50 Caps.
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
£83.53 Ex. VAT
Reviews
There are no reviews yet.