Common Rail Diesel Injector Repair Sockets
Must have when working on Common Rail engines.
This kit includes special tools to remove the injectors internal fixings.
Suitable for use on Bosch, Denso and Siemens injectors.
Includes:
3 x injector ball valve lapping tools.
Internal fixing removal tool for Common Rail injectors.
8 side socket for Bosch Common Rail engines.
Denso CR injector valve seat removal tool.
10 x 7.6 mm hex bit.
Common Rail Dummy Regulator Set
Function
Used alongside Welzh Diesel High Pressure Pump Test Kit (4606-WW) to diagnose regulator and pump issues.
Diagnosis Process
Identify Weak Pump Pressure: Observe low pump pressure.
Regulator Check: Remove regulator from the system.
Bypass and Seal: Select appropriate dummy plug to seal the port.
Pressure Observation: Monitor pressure response.
Results Interpretation
If pressure returns to normal: Regulator likely causing pressure loss.
If pressure remains low: Pump may be defective.
Manufacturer Recommended
Endorsed testing method by high-pressure pump manufacturers.
Kit Contents
Includes 8 diverse dummy plugs for sealing regulator ports.
Common Rail Flow Meter Set
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Common Rail Flow Meter Set Updated Version
Assists with diagnosis of: Poor or no engine starting, smoke on tick-over or acceleration, overall lack of engine power, rough running, poor acceleration.
Designed for use on the injector return side of a common rail diesel system, measures return fuel flow on engines up to ten injectors in one test.
Applications: Bosch, Delphi, Denso, Siemens, etc.
Compact Wheel Bearing Kit 62, 66, 72, 85mm GEN2 VAG Master Kit
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Combination Kit for Audi / Seat / Skoda / VW applications.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72, 78, 82, 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers Audi, Seat, Skoda & VW.
Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits:
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3.
82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70.
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 62, 66, 72mm GEN2
Compact Wheel Bearing Kit; 78mm GEN2
Facilitates assembly and disassembly of front wheel hub-bearing unit.
Suitable for following models:
Ford Focus 2 as of 2004, C-Max as of 2003.
Volvo C30 as of 2006, C70 Cabriolet as of 2006. S40 as of 2004, V50 as of 2004, Mazda.
Designed to work with OEM hub units.
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 82mm GEN2
Compact Wheel Bearing Kit; 85mm GEN2
The GEN 2 type of wheel bearing is predominantly fitted to models from VW Group.
Includes a variety of different diameter tool kits covering a range of sizes to suit the different.
GEN2 bearings used by vehicle manufacturers.
Designed to distribute pressing force evenly through the outer bearing race and also allows for.
the suspension leg to remain in-situ on the vehicle when fitting new bearings.
GEN2 Bearing Removal Combination Tool Kit: 62 / 66 / 72 / 85mm.
Combination Kit for Audi / Seat / Skoda / VW applications.
Consists of all necessary parts from the 62, 66, 72, 78, 82 & 85mm kits.
62mm Kit - Audi A2, VW Lupo (Front).
66mm Kit - Skoda Fabia, VW Fox (Front), Polo.
72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front).
85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear).
Replacement spindle available: 10100-WW.
Compact Wheel Bearing Kit; 90mm GEN2
Compact Wheel Bearing Kit; Ford Transit, GEN2
Compact Wheel Bearing Set 72mm GEN2
Conical Eraser Pad Set; 6-Piece Set
Specially Designed
Welzh Conical Pad-Erasers are designed to easily remove residue and dirt build-up from wheel surfaces.
For Hard to Reach Areas
Welzh Conical Pad-Erasers are ideal for reaching all areas of the wheel when cleaning.
Damage Free
The erasers are made of high-quality, cone-shaped rubber that won?t scratch or damage aluminium wheels.
Connector Removal Tool VAG & Porsche
Continental VDO / Siemens Injector Removal Adaptor
Coolant Mate™ Automatic Electronic Tester and Filler
Cooling System Bleeding and Filling Tool; 6-Piece
Cordless Circuit Tester
Cordless Circuit Tester; Heavy Duty
Cordless Electric Hot Stapler
Crankshaft Pulley Puller