Heel Bar Set; 4-Piece
Hexagon Key Set 3/8”dr; 48mm, H3-H10
HGV-Track Rod End Removal Tool
Specially designed to remove track rod ends found on HGVs.
Particularly useful when the tapper is separated.
Can be used with an impact wrench and 36 mm socket.
Simple solution to an awkward problem.
Because of the scale of the track rod and the build up of dirt the task can prove tricky. This simple solution allows you to use pneumatic tools to aid in the removal of the track rod saving time and unwanted effort. Must have!!!.
High Pressure Pump Sprocket Puller For Common-Rail Hyundai & Kia
To remove the high pressure pump sprocket when dismounting the high pressure pump on Common Rail Diesel vehicles from Hyundai and Kia.
Suitable for following vehicles: Kia Carens (UN), Cee'd (ED) & (JD), Optima (TF), Rio (UB), Soul (AM), Sportage (SL) & (SLE), Venga (YN), Soul (PS), Hyundai Matrix, Getz, i30.
Engine Codes: 1.1D (TCI-U2), 1.4D (TCI-U2), 1.6D (TCI-U2), 1.7D (TCI-U2), 1.6 TCI (U2), 1.4 CRDi (U2), 1.6 CRDi (U2).
Contains high pressure pump removal tool to be used as OEM 093312A010, consisting of base plate, sprocket stopper, mounting screws.
Hood Light; Telescopic
Hood Light; Telescopic, Cordless, LED
Robust and durable design - perfect for the busy workshop environment.
The attachment hooks are padded and polymer coated to prevent damage to the bonnet.
120 LEDs with a 120° spread of light provides ample illumination of the engine bay - or where ever it is used.
Lithium-Ion battery provides longer life; 7.4V / 2.0Ah.
Width range: 1290 - 2190mm.
Operating time: approx. 4h.
Charging time: approx. 6h.
Includes 230V and 12V charger.
Capacity: 7W.
Hose Clamp Compressor 60mm
Hose Clamp Compressor 85mm
Hose Clamp Plier Clic R Type
Hose Clamp Plier Set; 9-Piece
A comprehensive set of hose clamp tools all with vinyl coated handle.
For loosening / tightening hose clamps.
Suitable for most European, US and Asian vehicles.
Contents:
1 Hose clip pliers.
1 swivel clamp for spring steel clamps.
1 Swivel jaw band clamp pliers.
1 Flat belt clamp pliers, angled.
1 Hose disconnecting pliers.
1 Flat belt hose clamp pliers.
1 Screwdriver.
1 Hose disconnection tool.
1 Disconnection pliers for fuel lines.
Hose Clamp Pliers 3-Piece
For straight forward clamping of flexible hose pipes adjustable locking ring with locking function for complete stopping of the flow the hose is squeezed against the stable surface over a wide area, thus avoiding damage to the hose.
Ideal for maintenance work with petrol, oil, water and anti-freeze protects against leakage of petrol, oil, water and antifreeze ideally suited for cars, vans, MPVs, commercial vehicles, tractors, agricultural, construction and industrial uses.
Temperature resistance of up to 160 °C.
Hose clamp pliers, 155 mm, suitable for a hose diameter of 3 - 15mm.
Hose clamp pliers, 185 mm, suitable for a hose diameter of 6 - 20mm.
Hose clamp pliers, 255 mm, suitable for a hose diameter of 8 - 45mm.
Hose Clamp Set; 2-Piece
Hose Clip Plier – For Spring Type Clips
Hose Clip Plier
For the fitting and removal of clipless pre-opened SBC (Spring Band Clamps).
Spring Loaded Clips
Including pre-opened spring band clamps.
Spring loaded locking function allows for single handed application.
Spring type clamps used across the new VAG Group cars & Tesla.
Specially Designed
Used to fit & remove the pre-tensioned spring steel clips when clamping the coolant hoses.
Hose Clip Pliers; Long Reach, Interchangeable Heads
Professional quality hose clip pliers with interchangeable heads.
Long reach bowden cables.
670 mm cable for standard hose clamps.
Range: 3-52mm.
635 mm cable for Clip-R type hose clamps.
Range: 0-24mm.
670 mm cable for patented dual side clamps for spring type and truck hose clamps.
Lockable with quick release.
Hose Connector Kit; Plastic, 113-Piece
Hose Removal Plier
Easily disconnects hoses by gripping firmly the tubes/lines.
Jaw grooves for 3/16'', 1/4'' and 3/8'' tubes and lines.
Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible.
Pointed jaw tip allows access to confined spaces.
Special locking design enhances secure gripping.
Hot Stapler; Cordless Including 200-Piece Staples
Various Applications
For car bumper surface repair for car bumpers, kayaks, canoes, etc.
Specifications
Voltage: 3.7V DC 50W(Max).
Battery:18650 2600mAh Li-ion full charge approx 3-5hours.
The USB cable: 50cm long. One end is USB2.0, and the other is Type-C.
Kit includes
Cordless hot stapler.
A USB charging cable.
200pc plastic hot staples; 50pcs (4types).
1 cutter plier.
Can use 150-200 staples on one full charge.
Hub Arbieter™
For use on all new Generation 2 & 3 Hub-Bearing Units.
Allows the hub to be removed even when severely corroded.
Universal use on most wheel bearings allows disassembly and assembly of the wheel hub and the wheel bearings.
Includes pressure plates with diameters of: 50, 55, 59, 63.3, 66.6, 70.3, 71.5, 73.1, 73.4, 74.8, 77.5.
Simply Bolt to the wheel hub then power strike with a hammer allowing the hub to break free.
These new Generation Bearings are widely used on the most todays most popular cars: VAG, LandRover, Ford, Mazda, Volvo, Kia etc (particularly Vauxhall/Opel Insignia rear wheels).
Hub Mate™ Jack-Mounted Hub Supporter
Designed for supporting Control Arm, Universal application.
The HubMate™ Supporting Adaptor is used in conjunction with a transmission jack.
The support takes place via the wheel hub ensuring the correct raising and lowering of control arms/axles to specified positions.
Very effective when applied to removal and installation of suspension struts.
Inner Diameter: 30mm.