Showing 1–24 of 78 results

18-Piece Silent Block Tool For VAG Group

£176.63 Ex. VAT
For the replacement of bushes on wishbone / trailing arms, wheel bearing housing, lower wishbone downside / inside. Allows renewing of bushes on the vehicle, when installing. Applications: Jetta / Synchro 2006-2012. VW Golf 5 Plus / Variant. 4-Motion 2005-2012. Scirocco 2009-2012. Beetle 2012~. Eos 2006-2012.

27-Piece Universal Press & Pull Sleeve Set

£276.75 Ex. VAT
This precision tool kit is for extracting and drawing in bushes, bearing, seals, etc. A widely applicable set suitable for a majority of cars, LGV and HGV. Can be used independently (manual operation) or with a suitably sized workshop press and can be reworked (e.g. recess, etc) depending on requirements.

3-Piece Ball Joint Separator

£55.41 Ex. VAT
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser. Especially for working in narrow spaces. Suitable only for working on closed joints or joints with centre hole. Sizes: 23x55, 28x55, 34x63mm.

3-Piece Universal Joint With Spring Function; 14”, 38” & 12”

£38.95 Ex. VAT
Universal Joints with Spring Function Flexible U-Joint patented dual springs provide sufficient force to maintain the alignment of the male and female ends of the U-Joint. Ideal For Narrow Spaces The dual internal spring provide control of the U-Joint for insertion into narrow work areas, eliminating the problem of loose U-Joints. Sizes Included 1/4" Dr, 3/8" Dr and 1/2" Dr.

4-Piece Tool Set for Axial Joints/Rack End Removal and Installation Kit, Universal

£138.94 Ex. VAT
Designed for the fast and professional changing of the axial joint. Can be used on cars and light commercial vehicles. Automatic clamping of joint heads. Can be used on 30 - 45 mm joint heads. 3 exchangeable heads in one kit. Head sizes: (30-35) (35-40) (40-45). Works with a 1/2'' ratchet.

5-Piece Ball joint Separator Kit

£77.63 Ex. VAT
For separation of ball joints. Includes 5 separator forks fork opening: 20 - 24 - 30 - 35 - 42mm. Shaft diameter: 10mm. Length: 180mm.

7pc Heavy Duty Coilspring Compressor

£328.22 Ex. VAT
To be used on McPherson struts with cylindrical and conical springs. Contains: 1 x telescopic spindle. 3 x chuck couples. 1 x spacer for conical springs. 6 x plastic spring protectors. Applications: Audi, Alfa Romeo, BMW, Chrysler, Citroën, Ford, Fiat, Honda, Hyundai, Kia, Land Rover, Mazda, Mitsubishi,. Nissan, Opel, Peugeot, Porsche,. Renault, Saab, Seat, Subaru, Suzuki, Toyota, Vauxhall, VW and Volvo.

Adapter for Ford Focus and Mazda 3 Rear Bushes – Installation and Removal

£139.50 Ex. VAT
This kit can also be used with Art. 4148, 12 ton hydraulic ram. Designed to be used in situ with vehicle offering the most efficient method of completing the task. Make Model Applications. Ford Focus Mk I (98-07) Remove/Install. Ford Focus Mk II (98-07) Remove/Install. Ford Kuga (before 08) Remove/Install. Ford C Max MPV ((07) Remove/Install. Mazda 3 (Chassis BK 03-09) Remove/Install. Mazda 5 (Chassis CR, CW) Remove/Install. Volvo V50 Estate (04-12) Remove/Install. Volvo S40 Mk II (03-12) Remove/Install.

Adapters for 67306-WW For Mercedes Sprinter, VW Crafter

£194.06 Ex. VAT
New set designed to be used with 67306-WW. Includes a new sleeve to accommodate after-market arms. For use when removing and installing ball joints on Mercedes Sprinter ''95 -''06 and revised 2006 models. Codes: (901, 902, 903, 904 and 906). Applications: Mercedes-Benz Sprinter from 1995, VW Crafter from 2006, VW LT 1996 - 2006.

Air Installation Tool For CV Boots

£110.81 Ex. VAT
For the installation of CV boots without removing the drive shaft. Save huge amounts of time compared to traditional methods. Max Air Pressure: 116 PSI. Joint Diameter: 110mm. Air Inlet: 1/4'' BSP. Weight: 2 kg.

Axle Joint Tool 35-45mm

£77.63 Ex. VAT
For fast and professional changing of the axle joints of cars and light commercial vehicles. Automatic clamping of the joint heads and easy assembly of long tie rods because of open construction. Saves up to 3 hours of working time. For joint heads Ø 35 - 45mm. Works with 1/2'' ratchets or 27 mm sockets.

Ball Joint Kit; T4, T5, LT

£221.63 Ex. VAT
For assembly and disassembly of the upper supporting joints on VW T4, T5 & LT. 1 Extractor with hardened spindle (24mm hex drive). 2 Extension plates to adapt the extractor to the joint. 3 Interchangeable pressure pieces.

Ball Joint Remover and Installer for Volvo

£166.22 Ex. VAT
Designed to be used on the lower control arm ball joint. Slide hammer puller adapters: M12x1.75, M14x1.5, M14x2.0, 5/8'' x 18. Applications: Volvo S60 2001-2009. Volvo S80 1999-2006. Volvo V70 2001-2007. Volvo XC70 2003-2007. Volvo XC90 2003-2014.

Ball Joint Separator 2-Stage

£44.44 Ex. VAT
  • This extra heavy duty ball joint separator is designed to split the most stubborn joint taper with ease.
  • Jaw opening 56mm, Jaw width 22mm, Jaw depth 30mm
  • Spindles maximum torque pressure 40nm

Ball Joint Splitter; 23x55mm

£44.44 Ex. VAT
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser.

Ball Joint Splitters; 3-Piece

£66.66 Ex. VAT
For shifting/pushing the ball joint out of axle legs, drop arms, stabiliser. Especially for working in narrow spaces. Suitable only for working on closed joints or joints with centre hole. Sizes: 23x55, 28x55, 34x63mm. Applications: Audi, BMW, Ford, Chrysler, Opel, SAAB, Volvo, VW, Nissan, Toyota.

Balljoint / Tie Rod Separator Set 5-Piece

£44.44 Ex. VAT
Jaw opening approx. 17.4 - 23.8 - 28.5mm. Manufactured from forged carbon steel. 2 exchangeable handles - 1 for manual use and 1 for air hammer use/adaptor.

Balljoint Assembly Set; 21-Piece

£194.06 Ex. VAT
heavy duty model with 152 mm pressure fork opening. the set includes all necessary bushes and pressure plates for. changing the ball joints on most US, European SUV cars and Transporter. 230 mm pressure spindle. pressure spindle arm. pressure bolt for pressure spindle 1/4'' and 3/4'' (long type). reception bushes 1-3/4 x 2“ / 2-1/4“x 2-1/2“ / 2-3/4“x 3“ reception bushes 2-1/4“ / 1-3/4“ / 1-7/16“ / 2-3/4“ und 2-1/4“ adaptor for reception bushes 2“ reception cup2“ / 2-5/8“ / 2“ / 1-1/4“ / 1-3/4“ assembly cup 1-3/4“.

Balljoint Splitter 8 Ton Hydraulic

£221.63 Ex. VAT
Heavy duty design made to work every time. The benefit of using a hydraulic ram rather than a hammer or other form of impact is the gradual increase in pressure. Jaw opening: 55mm. Jaw width: 22mm. Jaw depth: 30mm. Spindle capacity: 8 ton. Working pressure: 40nm.

Bush Kit for Rear Axle on Ford Focus

£138.94 Ex. VAT
Remove/install rear trailing arm bushes on Ford, Mazda and Volvo vehicles. Can be used in situ - no need to remove rear axle from vehicle.

Bush Kit for Vauxhall; Rear Axle Bush Kit For Vauxhall Astra 2004-2014, Meriva 2010 onwards and Zafira 2005-201

£118.69 Ex. VAT
For replacing the bushes whilst the swinging arm is still on the vehicle. Applications: Astra 2004-2014, Meriva 2010 onwards and Zafira 2005-2012.

Bush Tool for Rear Axle on Ford Fiesta MK6 2008 onwards

£138.94 Ex. VAT
For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards. Fiesta Bush Number: 1805815 (FEB34748).

Bush Tool for Volkswagen Golf 5

£110.81 Ex. VAT
Using pressure via the force screw the bushing can be pressed out of the housing with ease and installed via the same method. Applications: VW Golf V, VI (03), Plus (05) Remove/Install. VW Scirocco (08) Remove/Install. VW Eos (06) Remove/Install. VW Jetta III, IV (05) Remove/Install. VW Passat (05) Remove/Install. VW Sharan (10) Remove/Install. Audi A3 (03) Remove/Install. Audi TT (06) Remove/Install. Seat Altea (04) Remove/Install. Seat Leon (04) Remove/Install. Seat Toledo (04-09) Remove/Install. Seat Alhambra (10) Remove/Install. Skoda Octavia (04) Remove/Install. Skoda Superb (08) Remove/Install. Skoda Yeti (09) Remove/Install.