Drill Bit Set; Twist Drill Set HSS Titanium nitrated 1 – 10 mm 170-Piece
Titanium Nitrated Coating:
Twisted drill bits roll forged and coated with titanium nitrate allowing for increased durability & long lasting strength.
Strong & Long Lasting Drill Bits:
Drills manufactured in accordance with DIN 338.
For Drilling in Various Materials:
Suitable for drilling plastics, wood, steel, cast iron,non-ferrous metals, alloyed & non-alloyed material.
Sizes Included:
1.0-8.0 mm (in 0.5mm steps): 10 piece each.
8.5-10.0 mm (in 0.5mm steps): 5 piece each.
Drill Out Kit with Guides; Universal
Drive Shaft Squeezing Pliers
Designed to pre-tension the drive shaft circlip during assembly of the outer constant velocity joint.
Suitable for: VW, Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, SEAT, Skoda, Subaru, Suzuki, Toyota Etc.
By holding the driveshaft circlip with the 8022 the outer drive shaft splines can be easily assembled onto the CV joint.
Ergonomic Ratchet Pipe Clamps
EV Hybrid Tool Kit; 63-Piece
Comprehensive EV-Hybrid Tool Kit
A master EV tool kit designed for a wide range of applications, individually tested, and rated for 1,000 Volts
Rugged Design
Insulated VDE (Voltage Detection Equipment) fully compact tool case with rugged and shock-resistant features
EVA Technology Tray Development
All trays developed using EVA technology, providing durability and organization
Kit Includes:
Long Nose Pliers 8"
Side Cutter Pliers 6"
Combination Pliers 7"
Circuit Tester
Hex Key 3mm
Hex Key 4mm
Hex Key 5mm
Hex Key 6mm
Hex Key 8mm
Hex Key 10mm
Hex Key 12mm
1/2" Socket 10mm
1/2" Socket 11mm
1/2" Socket 12mm
1/2" Socket 13mm
1/2" Socket 14mm
1/2" Socket 16mm
1/2" Socket 17mm
1/2" Socket 18mm
1/2" Socket 19mm
1/2" Socket 21mm
1/2" Socket 22mm
1/2" Socket 24mm
1/2" Socket 27mm
1/2" Extension Bar 250mm
1/2" Ratchet Wrench
1/2" Bit Socket H4
1/2" Bit Socket H5
1/2" Bit Socket H6
1/2" Bit Socket H8
Wire Stripper 6"
Waterpump Pliers 10"
Adjustable Wrench 10"
Scissors 6"
Insluated Tape 10m
Philips Screwdriver PH1x80mm
Philips Screwdriver PH2x100mm
Pozi Screwdriver PZ1x80mm
Pozi Screwdriver PZ2x100mm
Slotted Screwdriver SL3x0.5x100mm
Slotted Screwdriver SL4x0.8x100mm
Slotted Screwdriver SL5x1x125mm
Slotted Screwdriver SL6x1.2x150mm
Torx Screwdriver T15x80mm
Torx Screwdriver T20x100mm
Torx Screwdriver T30x130mm
Open Ended Spanner 6mm
Open Ended Spanner 7mm
Open Ended Spanner 8mm
Open Ended Spanner 9mm
Open Ended Spanner 10mm
Open Ended Spanner 11mm
Open Ended Spanner 12mm
Open Ended Spanner 13mm
Open Ended Spanner 14mm
Open Ended Spanner 15mm
Open Ended Spanner 16mm
Open Ended Spanner 17mm
Open Ended Spanner 19mm
Open Ended Spanner 21mm
Wire Clamp 10mm
Wire Clamp 20mm
Wire Clamp 30mm
Exhaust Hanger Removal Plier
Exhaust Pipe Clamp Removal Pliers
Exhaust Removal Plier
Extendable Pry Bar With Rotating Head 34-47mm
Heavy-Duty hardened and tempered steel extendable prybar with blackened finish.
Quick release locking mechanism retains extension at set increments giving twenty seven different shaft lengths.
Features 180° adjustable head, simply push button to adjust then release to lock into position.
Ideal for general force and alignment work.
Allows for greater access & Leverage over conventional bars.
Shaft lengths from 34-47mm.
Extendable Pry Bar With Rotating Head 63-94mm
Heavy-Duty hardened and tempered steel extendable prybar with blackened finish.
Quick release locking mechanism retains extension at set increments giving twenty seven different shaft lengths.
Features 180° adjustable head, simply push button to adjust then release to lock into position.
Ideal for general force and alignment work.
Allows for greater access & Leverage over conventional bars.
Shaft lengths from 63-94mm.
Extendable Pry Bar With Rotating Head 86.-135mm
Heavy-Duty hardened and tempered steel extendable prybar with blackened finish.
Quick release locking mechanism retains extension at set increments giving twenty seven different shaft lengths.
Features 180° adjustable head, simply push button to adjust then release to lock into position.
Ideal for general force and alignment work.
Allows for greater access & Leverage over conventional bars.
Shaft lengths from 86-135mm.
Extendable Pry Bar; Double Rotating Head 340-470mm
Extendable Pry Bar; Double Rotating Head 630-940mm
External Deburring Chamfer Tool 3-19mm
External Deburring Chamfer Tools; 2-Piece Set
External Deburring Chamfer Tools; 2-Piece Set
File Set; 4-Piece Diamond Version
The Best-Contoured Files Available on the Market Today.
The WELZH 8? Diamond File Set includes four abrasive, diamond-coated hand files (Half Round, Round, Flat and Triangle) that are 20 times harder than traditional files and can be used in any direction, cutting faster and smoother for a better finish.
Designed to work in all directions.
Cuts into welds and hardened surfaces where other files can?t.
Smooth action.
12? overall length with 8? blade.
File Set; 5-Piece
Flap Disk Welzh Slotted, Aluminum Oxide 40 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst Grinding which allows for superior working compared with standard flap disk, Alows even grinding results. Ideal for processing thin metal sheets. Prevents undesired excessive grinding Reduction of processing faults. Better surface quality as a result of more targeted work. Cool grinding due to fan effect. Reduction of temperature on the surface prevents undesired blue colouring of the workpiece. Good, steady guidance. Notice: When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool. General steel construction: * Welding seam preparation and post-processing. * Derusting. * Removal of scale (in small quantities). * Grinding of wrought ironwork (grills, railings, banisters handrails). * Removal of excess zinc on weld seams before plastic coating. Stainless steel processing: * Pipeline construction, tank and container construction. * Apparatus construction (chemical industry). * Plant construction, e.g. brewing and food industry. * Boat building. Aluminium processing (all non-ferrous metals): * Special vehicles, such as silo vehicles, ambulances, fire engines etc. * Ship-building. * Aircraft construction. Agricultural machinery: Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs: * Paints and filler compounds, MIG solder seams. * Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters). Wood and FRP processing. Precise surfaces or edge corrections.
Flap Disk Welzh Slotted, Aluminum Oxide 60 Grit ;115 mm (20 per Box)
Welzh Slotted Flap Disk have been innovatively engineered to see through whilst grinding which allows for superior working compared with standard flap disk.
Alows even grinding results. Ideal for processing thin metal sheets.
Prevents undesired excessive grinding Reduction of processing faults.
Better surface quality as a result of more targeted work.
Cool grinding due to fan effect.
Reduction of temperature on the surface prevents undesired blue colouring of the workpiece.
Good, steady guidance.
Notice:
When only wood or plastics are ground, the disc must be cleaned by grinding on a sharp-edged iron tool.
General steel construction:
* Welding seam preparation and post-processing.
* Derusting.
* Removal of scale (in small quantities).
* Grinding of wrought ironwork (grills, railings, banisters handrails).
* Removal of excess zinc on weld seams before plastic coating.
Stainless steel processing:
* Pipeline construction, tank and container construction.
* Apparatus construction (chemical industry).
* Plant construction, e.g. brewing and food industry.
* Boat building.
Aluminium processing (all non-ferrous metals):
* Special vehicles, such as silo vehicles, ambulances, fire engines etc.
* Ship-building.
* Aircraft construction.
Agricultural machinery:
Sharpening of blades (lawn mowers, reciprocating finger bar mowers). Body construction.??Accident repairs:
* Paints and filler compounds, MIG solder seams.
* Special vehicle construction (lorry attachments, servicing, wearing parts for bulk material transporters).
Wood and FRP processing.
Precise surfaces or edge corrections.