Used to Clean and De-carbonise injector seats when Changing Injectors.
14 x 14mm Flat Reamer.
15 x 19mm Flat Reamer.
15.5 x 15.5mm Flat Reamer.
15.5 x 15.5mm Angled Reamer.
17 x 17mm Angled Reamer.
17 x 17mm Flat Reamer.
17 x 17.5mm Flat Reamer.
17 x 19mm Flat Reamer.
17 x 19.5mm Flat Reamer.
17 x 20mm Flat Reamer.
17 x 21mm Angled Reamer.
17.5 x 20.5mm Angled Reamer.
19 x 21.5mm Flat Reamer.
Pilot Hex Post 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
View basket “Injector Remover for Bosch Injectors; Diesel” has been added to your basket.
21-Piece Master Injector Service Kit for Bosch, Delphi, Denso, Siemens
£196.82 Ex. VAT
SKU:
3880-WW
Category: Injectors
Description
Reviews (0)
Be the first to review “21-Piece Master Injector Service Kit for Bosch, Delphi, Denso, Siemens” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Remover for Bosch Injectors; Diesel
£110.81 Ex. VAT
Quickly and easily remove stubborn stuck diesel injectors.
Suitable for assembling and disassembling tightly fit common rail injectors.
Suitable for e.g. Mercedes CDI engines 611, 612 and 613.
Suitable for working in confined spaces due to the low support cylinder diameter.
Special tool construction allows to pull injector with high force.
Injector Pump Puller; VAG Engines
£166.22 Ex. VAT
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Injector Copper Washer Seal Kit; 375-Piece
£55.41 Ex. VAT
13.8 x 7.3 x 1.4 mm x25.
14.6 x 7.5 x 1.3 mm x25.
14.6 x 7.5 x 3.0 mm x25.
15.0 x 7.0 x 2.0 mm x25.
15.0 x 7.5 x 1.0 mm x25.
15.0 x 7.5 x 1.5 mm x25.
15.0 x 7.5 x 2.0 mm x25.
15.0 x 7.5 x 2.5 mm x25.
15.0 x 7.5 x 3.0 mm x25.
15.5 x 7.5 x 2.0 mm x25.
16.0 x 7.5 x 1.5 mm x25.
16.0 x 7.5 x 1.7 mm x25.
16.0 x 7.5 x 2.0 mm x25.
16.4 x 7.5 x 2.0 mm x25.
20.0 x 9.4 x 0.9 mm x25.
Injector Removal Tool; Vauxhall, Opel Direct Injection Petrol
£64.95 Ex. VAT
Welzh Injector Removal tool
For use on the late model 1.0L and 1.4L direct injection petrol engines used across the Vauxhall, Opel and some MG ranges. These small injectors are centrally mounted low between the cam shafts and in line with the spark plugs.
Effective Removal
Some force is required to remove the injectors. The most effective way to remove these is to use the adaptor set with the WELZH Vibration Mate (4590-WW, 4589-WW). The Injector Removal Tool (4998-WW) adaptor set has been specifically design to bolt directly to the fuel rail mounting on the Petrol Injector 5/8? UNF slide hammer adaptor.
Applications include:
MG ZS (2017 - 2021), Vauxhall/Opel Adam (2016 - 2020), Astra K (2015 - 2019), Corsa E (2015 - 2020) and Mokka X (2018 - 2020).
Engine code applications include: 1.0L LE1/B10, 1.4L LDD/D14XEL, D14XER, LE2/D14XFL, D14XFT, LUJ/D14NE, D14NEH, D14NEJ, LUJ/D14NEL and 1.5L 15E4E.
Designed to bolt directly to the 2 bolt fixing on the fuel pipe mounting plate. Equivalent to OEM TEN00140.
Injector Service Kit; Bosch, Delphi, Denso, Siemens
£133.03 Ex. VAT
Injector Seat Cleaners; 6-Piece
£66.66 Ex. VAT
9-Piece CDI Injector Puller Set
£77.63 Ex. VAT
Injector Removal Kit with Slide Hammer and Adapters; 14 pcs
£110.81 Ex. VAT
Ball joint allows hammer to be used in confined areas.
Set includes keys and deep open profile sockets for.
Dismantling injectors, and adaptors.
Allows easy and quick removal of the injector.
Includes:
Sliding hammer with shaft and handle, weight 4400g.
Ball joint adaptors.
Adaptor (internal thread): m14 x m14 - m17 x m14, m25 x m14 - m27 x m14.
Adaptors (external thread): m27 x m14 - m20 x m14.
6-Pt socket for electrical unit 25 - 27 - 29 - 30.
10 Mm hexagon bit socket with 12.5-1/2 Drive.
Reviews
There are no reviews yet.