For removing rust, dirt, corrosion and ridge that can build up on brake discs and hubs.
Very useful for removing the metallic lip around the edge of brake discs.
Manufactured from Black electroplated shafts with long lasting Quality Tungsten carbide tips.
View basket “9-Piece CDI Injector Puller Set” has been added to your basket.
Mini Air Needle Scaler
£234.95 Ex. VAT
12-Piece Air Hose Connector Adaptor Set EU Fitting
£33.47 Ex. VAT
Brake Disk Lip Removal Kit
£101.19 Ex. VAT
For removing rust, dirt, corrosion and ridge that can build up on brake discs and hubs.
Very useful for removing the metallic lip around the edge of brake discs.
Manufactured from Black electroplated shafts with long lasting Quality Tungsten carbide tips.
SKU:
3648-WW
Category: Engine Tools
Description
Reviews (0)
Be the first to review “Brake Disk Lip Removal Kit” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Injector Service Kit; Bosch, Delphi, Denso, Siemens
£133.03 Ex. VAT
Glow Plug Removal Set for Damaged Glow Plugs
£217.69 Ex. VAT
Simplifies the assembly and disassembly and professional repair of glow plug threads extractor for fixed glow plugs.
Step drill to drill out damaged glow plugs 7 x 5.5 mm and 9 x 5.5mm.
Tap for regrooving of the glow plug threads: M8 x 1.0 mm - M10 x 1.0 mm - 6.3 mm (1/4'') x 28UNF.
Holder for thread tap with ratchet function.
E-type socket E10.
Injector Copper Washer Seal Kit; 375-Piece
£55.41 Ex. VAT
13.8 x 7.3 x 1.4 mm x25.
14.6 x 7.5 x 1.3 mm x25.
14.6 x 7.5 x 3.0 mm x25.
15.0 x 7.0 x 2.0 mm x25.
15.0 x 7.5 x 1.0 mm x25.
15.0 x 7.5 x 1.5 mm x25.
15.0 x 7.5 x 2.0 mm x25.
15.0 x 7.5 x 2.5 mm x25.
15.0 x 7.5 x 3.0 mm x25.
15.5 x 7.5 x 2.0 mm x25.
16.0 x 7.5 x 1.5 mm x25.
16.0 x 7.5 x 1.7 mm x25.
16.0 x 7.5 x 2.0 mm x25.
16.4 x 7.5 x 2.0 mm x25.
20.0 x 9.4 x 0.9 mm x25.
Injector Pump Puller; VAG Engines
£166.22 Ex. VAT
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Common Rail Flow Meter Set
£110.81 Ex. VAT
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Ignition Coil Puller Tool – VAG
£44.44 Ex. VAT
40-Piece Glow Plug Removal Kit M8-M10
£217.69 Ex. VAT
For removing damaged and broken glow plugs from cylinder heads.
Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head.
Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread).
6 x extractor sockets.
1 x dual size high tensile step drill.
1 x narrow pulling unit set.
1 x drill holder extension.
2 x taps.
2 x drill bits.
2 x glow plug chamber cleaning brushes.
Injector Removal Master Kit; Bosch, Delphi, Denso, Siemens
£228.42 Ex. VAT
Master kit for use on Bosch, Delphi, Denso and Siemens injectors.
Can also be used on non branded injectors.
Included are special adapters for internal and external threads.
For more modern injectors look for Art. 4199.
Slide hammer 1.6kg, 160mm.
Slide hammer 2.7kg, 460mm.
Slide hammer 5.1kg, 600mm.
Pulling claw 13.7 x 18 mm, 105 mm long.
Pulling claw 12.7 x 19 mm, 130 mm long.
Slotted socket 1/2'' 25, 27, 28, 29, 30mm.
Pulling adapter Internal thread M27 x 1.0 (x3), M25 x 1.
Pulling adapter External thread M27 x 1.0 (x3).
Hammer adapter for all adapters.







Reviews
There are no reviews yet.