View basket “Impact Vibration Glow Plug Removal Gun Incl Sockets 8-12mm” has been added to your basket.
Clutch Alignment Tool
£28.95 Ex. VAT
Difficult Access Socket Set; 3/8"dr 6-Piece
£54.95 Ex. VAT
Diesel Injector Extractor; For M9R
£184.95 Ex. VAT
Free Shipping
Applications: M9R 2.0 DCI, Renault: trafic, Opel/Vauxhall: Vivaro, Nissan: Primaster.
Used to remove seized or corroded diesel injectors.
Reviews (0)
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Twist Socket Set; 1/4”dr Long Reach
£39.95 Ex. VAT
Injector Seat Cleaners; 17-Piece
£138.94 Ex. VAT
Used to clean and de-carbonise injector seats when changing injectors.
Suitable for a wide range of vehicles.
Contents:
14mm x 14mm Flat Reamer.
15mm x 19mm Flat Reamer.
15.5mm x 15.5mm Flat Reamer.
15.5mm x 15.5mm Angled Reamer.
17mm x 17mm Angled Reamer.
17mm x 17mm Flat Reamer.
17mm x 17.5mm Flat Reamer.
17mm x 19mm Flat Reamer.
17mm x 19.5mm Flat Reamer.
17mm x 20mm Flat Reamer.
17mm x 21mm Angled Reamer.
17.5mm x 20.5mm Angled Reamer.
19mm x 21.5mm Flat Reamer.
Pilot Hex 19 x 170mm.
15.5 X 250mm Cutter.
2.5mm Hex Key.
T-handle.
Impact Vibration Glow Plug Removal Gun Incl Sockets 8-12mm
£172.69 Ex. VAT
The impact wrench is designed to deliver low torque in 4 stages (10, 20, 30, 40 nm).
The use on vibrations and torque will allow easy removal of stuck glow plugs.
The level of torque will stop the shearing of the glow plug head.
Impact Gun: 20 to 40nm.
Deep Sockets: 8, 9, 10, 11, 12mm.
Extension Bars 50 & 100mm.
Universal Joint.
1/4'' Drive.
Injector Removal Adaptors; Universal
£155.25 Ex. VAT
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Common Rail Flow Meter Set
£110.81 Ex. VAT
Includes: 6 glass tubes, 6 measurement cartridges with 70 cm connecting lines, mounted on aluminium bar with hooks, 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch, etc.
Can be used on various injector brands such as Bosch, Denso, Delphi and Siemens.
Run back amount can be measured accurately via the glass tubes.
For use on common rail engines with up to 6 injectors.
Injector Pump Puller; VAG Engines
£166.22 Ex. VAT
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
£83.53 Ex. VAT
Injector Removal Master Kit; Bosch, Delphi, Denso, Siemens
£228.42 Ex. VAT
Master kit for use on Bosch, Delphi, Denso and Siemens injectors.
Can also be used on non branded injectors.
Included are special adapters for internal and external threads.
For more modern injectors look for Art. 4199.
Slide hammer 1.6kg, 160mm.
Slide hammer 2.7kg, 460mm.
Slide hammer 5.1kg, 600mm.
Pulling claw 13.7 x 18 mm, 105 mm long.
Pulling claw 12.7 x 19 mm, 130 mm long.
Slotted socket 1/2'' 25, 27, 28, 29, 30mm.
Pulling adapter Internal thread M27 x 1.0 (x3), M25 x 1.
Pulling adapter External thread M27 x 1.0 (x3).
Hammer adapter for all adapters.
Reviews
There are no reviews yet.