for 1.2, 1.4, 1.6 and 2.0 L TDI Common-Rail engines
also for the new engines built from 2013 in VW Amarock, Arteon, Beetle II, Caddy III/IV, Eos, Golf VI/VII, Jetta III/IV, Passat (3C/36/3G/CC), Polo (6R/AW), Scirocco III, Sharan (7N),
Tiguan (5N/AD/BW), Touran (1T/5T), T-Roc, T5/T6 and Crafter
Audi A1 (8X), A3 (8P/8V), A4 (B8/B9), A5 (8T/F), A6 (C7), Q2, Q3 (8P/8V), Q5 (8R/FY) and TT (8J)
Skoda Fabia II, Karoq, Octavia II/III, Rapid, Roomster, Scala, Superb II/III and Yeti
Seat Alhambra, Altea (5P), Arona, Ateca, Exeo, Ibiza IV/V, Leon (1P/5F), Tarraco and Toledo IV
when disassembling the piezo injectors for sealing or engine repair
for engine codes
CAGA, CAGB, CAGC, CAHA, CAHB, CAYA, CAYB, CAYC, CAYD, CAYE, CBAA, CBAB, CBBB, CBDA, CBDB, CBDC, CDBA, CEGA, CFFA, CFFB, CFFD, CFFE, CFGB, CFGC, CFGD, CFHA, CFHB, CFHC, CFHD, CFHE, CFHF, CFJA, CFJB, CFWA, CGLA, CGLB, CGLC, CGLD, CGLE, CJAA, CJCA, CJCB, CJCC, CJCD, CKFB, CKFC, CKTB, CKTC, CKUB, CKUC, CLCA, CLCB, CLHA, CLHB, CLJA, CLLA, CLLB, CLNA, CMEA, CMFA, CMFB, CMGA, CMGB, CNEA, CNFA, CNFB, CNHA, CNHC, CRBB, CRBC, CRBD, CRKA, CRKB, CRLB, CRLC, CRLD, CRMB, CRUA, CRVA, CRVC, CSHA, CSLA, CSNA, CSUA, CSUB, CSUD, CSUE, CUSA, CUSB, CUTA, CUUA, CUUB, CUUD, CUUE, CUUF, CUVA, CUVB, CUVC, CUVD, CUVE, CUWA, CUXA, CVCA, CXMA, CXXA, CXXB, CYKA, CYKB, CYZA, CYZB, CZHA, DBBA, DBGA, DBGB, DBGC, DBKA, DCXA, DCYA, DCYB, DCZA, DDCA, DDCB, DDDA, DDYA, DDYB, DEJA, DEJB, DELA, DEUA, DEUB, DEUC, DFEA, DFEB, DFFA, DFGA, DFGB, DFGC, DFHA, DFLA, DFLD, DFSA, DFSB, DFSC, DFSD, DFSE, DFSF, DFTA, DFTB, DFTC, DGDA, DGMA, DGTA, DGTB, DGTC, DGTD, DGTE, DJGA, DLTA, DLUB
View basket “Injector Copper Washer Seal Kit; 375-Piece” has been added to your basket.

Mini Air Needle Scaler
£234.95 Ex. VAT

12-Piece Air Hose Connector Adaptor Set EU Fitting
£33.47 Ex. VAT
Diesel Injector Puller; For Piezo injectors In VAG TDi
£106.82 Ex. VAT
SKU:
3963-WW
Category: Injectors
Description
Reviews (0)
Be the first to review “Diesel Injector Puller; For Piezo injectors In VAG TDi” Cancel reply
Shipping & Delivery
Shipping Information
United Kingdom
If products are ordered before 3pm then they will be shipped next business day, any orders after 3pm will be shipped within 2 business days.
Europe
If products are ordered before 3pm then will be shipped next business day. Any orders after 3pm we aim to have shipped within 3 Business days.
Contact Us
If you have an queries regarding delivery then please feel free to contact us on:
United Kingdom
+44 7824 346 663
Europe
+31 (0)6 26 51 83 20
Related products
Vibration Mate Injector Removal Tool
£500.00 Ex. VAT
Injector Seat Cleaners; VAG Engines, 2.0L Common Rail
£83.53 Ex. VAT
Diesel Injector Extractor; For M9R
£184.95 Ex. VAT
Injector Pump Puller; VAG Engines
£166.22 Ex. VAT
Applications: Audi, SEAT, Skoda and VW vehicles with direct injection pump engines. Also for engines with Pump injector units.
Should be used as OEM T10133 andT10163.
Includes:
Puller for dismantling FSI injectors(T10133/1).
Puller claw for dismantling FSI injectorsT10133/2.
Sliding hammer T10133/3.
Cone for mounting the combustion chamber rings (T10133/5).
3 calibration tools for mounting the combustion chamber rings T10133/6, T10133/7, T10133/8.
Built-in pin for mounting the FSI injectorsT10133/9.
Extractor for dismantling pump-injector units.
Injector Copper Seal Kit; 150-Piece
£33.47 Ex. VAT
For replacing the copper washer at the base of the injector shaft on CDI engine.
Includes 10 each of the following sizes:
Ext. Ø 13.8 mm x Int. Ø 7.3 mm, 1.4mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 1.3mm.
Ext. Ø 14.6 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.0 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 2.5mm.
Ext. Ø 15.0 mm x Int. Ø 7.5 mm, 3.0mm.
Ext. Ø 15.5 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.5mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 1.7mm.
Ext. Ø 16.0 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 16.4 mm x Int. Ø 7.5 mm, 2.0mm.
Ext. Ø 20.0 mm x Int. Ø 9.4 mm, 0.9mm.
Injector Service Kit; Bosch, Delphi, Denso, Siemens
£133.03 Ex. VAT
Injector Removal Master Kit; Bosch, Delphi, Denso, Siemens
£228.42 Ex. VAT
Master kit for use on Bosch, Delphi, Denso and Siemens injectors.
Can also be used on non branded injectors.
Included are special adapters for internal and external threads.
For more modern injectors look for Art. 4199.
Slide hammer 1.6kg, 160mm.
Slide hammer 2.7kg, 460mm.
Slide hammer 5.1kg, 600mm.
Pulling claw 13.7 x 18 mm, 105 mm long.
Pulling claw 12.7 x 19 mm, 130 mm long.
Slotted socket 1/2'' 25, 27, 28, 29, 30mm.
Pulling adapter Internal thread M27 x 1.0 (x3), M25 x 1.
Pulling adapter External thread M27 x 1.0 (x3).
Hammer adapter for all adapters.
Injector Removal Adaptors; Universal
£155.25 Ex. VAT
For pulling out hard to remove diesel injectors.
To be used with our optional sliding hammers 4212-WW.
Includes the following tools:
6 adapters for installation in the injector thread.
Inside thread M20x1.5 to inside thread M14x1.0.
Inside thread M20x1.5 to outside thread M17x1.0.
Inside thread M20x1.5 to outside thread M18x1.5.
Inside thread M20x1.5 to outside thread M20x1.0.
Inside thread M20x1.5 to outside thread M25x1.0.
Inside thread M20x1.5 to outside thread M27x1.0.
3 pulling claws with inside thread M18x1.5and claw width 12, 13 and 16 mm -ball head adapter M18x1.5 to M18x1.10 mm int.
Reviews
There are no reviews yet.