10-Piece Carbide Burr Set
10-Piece Twist Socket Set; 3/8”, 10-19mm
10” Grip-Lok™; Straight Jaws Locking Plier
11-Piece Punch & Chisel Set
Strong Long Lasting Metal:
High Grade Chrome Molybdenum Steel.
Corrosion Prevention:
Plated to Prevent Corrosion.
Ergonomic Handles:
Allows for comfort & grip.
EVA Foam Tray:
Supplied in Industry Approved EVA Foam.
Sizes Included:
Pin Punches: 2, 3, 4, 5, 6mm.
Taper Punches: 4, 5, 6mm.
Cold Chisels: 12, 16mm.
Centre Punch: 2.5mm.
110-Piece Metric & SAE Tap + Die Set
Designed for fine threads in particular.
Made from Tungsten Steel.
Included:
2 tap holders.
2 die holders.
1 T holder.
Each 35 taps and dies in following sizes / flank leads:
4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC.
10-32UNF, 12-24UNC, 12-24UNC, 1/4-28UNF.
1/4-24UNS, 1/4-32UNS, 5/16-18UNC, 5/16-24UNF.
3/8-16UNC, 3/8-24UNF, 7/16-14UNC, 7/16-20UNF.
1/2-13UNC, 1/2-20UNF, 9/16-12UNC, 9/16-18UNF.
5/8-11UNC, 5/8-18UNF, 3/4-10UNC, 3/4-16UNF.
M6X1,0, M8X1,25, M10X1,5, M10X1,0.
M11X1,5, M12X1,25, M12X1,75, M14X1,25.
M18X1,5, 1/8-27NP, 1/4-18NPT.
110-Piece Metric Tap + Die Set M2-M18
Especially for fine threads.
Made from Tungsten Steel.
2 tap holders.
2 die holders.
1 T holder.
Sizes:
M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0.
M6 x 0.75, M7 x 1.0, M7 x 0.75, M8 x 0.75, M8 x 1.0.
M8 x 1.25, M9 x 0.75, M9 x 1.0, M9 x 1.25, M10 x 0.75.
M10 x 1.0, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1.0.
M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1.0, M12 x 1.25.
M12 x 1.5, M12 x 1.75, M14 x 1.0, M14 x 1.25, M14 x 1.5.
M14 x 2.0, M16 x 1.0, M16 x 1.5, M16 x 2.0, M18 x 1.5.
114-Piece Oil Sump Repair Kit
This comprehensive kit has been designed to repair damaged threads in the oil sump.
Can also be used on gearboxes and differential drain plugs.
Simply re-tap the thread and fit the corresponding sump plugs.
The range of sizes in this set allows it to be used on most of the cars and LCV on the market today.
Includes:
Tap: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5 (1 each).
Plugs: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5(6 of each).
Washers: 13, 15, 17, 20, 22 mm (various).
12 Volt Oil Pump
Max. flow rate for engine oil approx. 0, 2l /min.
Ideal equipment for quick and clean oil-changes.
The oil-pump works by connecting the clamps to the 12V car battery.
Can remove 100% of the used oil if inserted through the dipstick opening.
Complete with all necessary accessories.
Max. suction lift height: 70 cm.
No suitable for fuel and other easy flammable fluids.
.